المميزات
- The low profile design of the Optical/Heat Multisensor detector Detector is sleek and evolutionary, with a 360° LED indicator which illuminates red when in alarm.
- Non-polarity, two-bus connection that ensures convenient installation and maintenance.
- It can realize electronic coding and rewrite the address via coder in site.
- Within a single-chip MCU, it can realize real-time data acquisition and processing, realize a curve tracing for the field situation.
- It has a temperature, humidity and dust accumulation drift compensation function and a sensor fault detection function (fault reporting to fire alarm control panel).
- A sophisticated dynamic algorithm, providing transient rejection and compensation for drift whilst maintaining accurate sensitivity.
المواصفات الفنية
| Executive standard | EN54-5 & EN54-7 |
|---|---|
| Operating voltage | 24V (pulse modulation) |
| Work indication | The red indicator will blink in the monitoring status or remain lit in the alarm status |
| Coding mode | It can realize electronic coding via coder in site. Address codes 1 to 324 are available for selection |
| Wiring method | non-polarity two-bus system (L1, L2) |
| Operating environment | Indoor, temperature: －10℃～+55℃; relative humidity: ≤95% (non-condensing or icing ) |
| External dimensions | diameter: 100mm, height: 58mm (with the base) |
| Weight | about 123g(with Base) |
المستندات
هل تحتاج إلى مساعدة في اختيار المنتج؟
تواصل مع ADT لمعرفة التوفر والتوافق والحصول على المشورة لمشروعك.